Evaluation of Concrete Characteristics for Rigid Pavements

Report No: 98-R24

Published in 1998

About the report:

The researcher developed correlations among flexural, split tensile, and compressive strengths and ultrasonic pulse velocity from laboratory testing using materials and mix designs proposed for use in a paving project. These relationships were used to review the current Virginia Department of Transportation specifications and quality control procedures for concrete used in the construction of rigid pavements. Correlations between compressive and flexural strength for project-specific materials and mix designs permit the use of compressive strength cylinders rather than beams for compliance testing. The relationships also provide a means for evaluating the quality of the concrete as placed in the pavement.

Documents

98-R24

_{Disclaimer Statement:The contents of this report reflect the views of the author(s), who is responsible for the facts and the accuracy of the data presented herein. The contents do not necessarily reflect the official views or policies of the Virginia Department of Transportation, the Commonwealth Transportation Board, or the Federal Highway Administration. This report does not constitute a standard, specification, or regulation. Any inclusion of manufacturer names, trade names, or trademarks is for identification purposes only and is not to be considered an endorsement.}

Authors

D. Stephen Lane

Last updated: December 15, 2023