Evaluation of Two Corrosion Inhibitors Using Two Surface Application Methods for Reinforced Concrete Structures

Report No: 05-R16

Published in 2004

About the report:

This study investigated the use of penetrating corrosion inhibitors to extend the life of existing reinforced concrete bridge decks. The use of assisted (vacuum/pressure injection) and unassisted (diffusion) treatment methods and two inhibitors were evaluated. The inhibitors were FerroGard 903, from Sika Corp., and TPS-II, from Surtreat International. Testing was performed on exposure slabs with 15 lb/yd3 of NaCl in the top layer and no NaCl in the bottom layer. The slab design was a variation of the specimen design provided in ASTM G109, with each slab containing nine steel reinforcing rods instead of three. The exposure slabs had either a uniform cover over the top pieces of steel or an inclined cover over the steel. TPS-II was also evaluated on the deck of a bridge in Orange County, Virginia. The study found that when applied to the concrete surface, neither inhibitor penetrated the concrete to reach the steel reinforcement. The vacuum/pressure injection method showed promise but requires refinement. In addition, based on macro-cell measurements, a sufficient quantity of inhibitor can be injected into the concrete to reduce the charge passed.

Disclaimer Statement:The contents of this report reflect the views of the author(s), who is responsible for the facts and the accuracy of the data presented herein. The contents do not necessarily reflect the official views or policies of the Virginia Department of Transportation, the Commonwealth Transportation Board, or the Federal Highway Administration. This report does not constitute a standard, specification, or regulation. Any inclusion of manufacturer names, trade names, or trademarks is for identification purposes only and is not to be considered an endorsement.

Last updated: November 29, 2023

Alert Icon

Please note that this file is not ADA compliant. Choose one of below options: